User`s guide

Configuring and Testing the PCLTA-21 Card
18
Network Image Windows XP or 2000 Windows 98
LNS Fast Network Image
(LNS 3 and newer)
PCLTA21VNI
TX LED lights every time the PCLTA-21 sends
a packet.
RX LED lights every time the PCLTA-21 sees a
packet, whether or not it is addressed to the
PCLTA-21.
PCL10VNI
LNS Network Image
Interface (LNS 1 and 2)
PCLTA21NSI
TX and RX LEDs do not function with this
image.
NSIPCLTA
Basic Network Interface
Application (MIP and older
API Applications)
PCLTA21L7
TX LED lights every time the PCLTA-21 sends
a packet.
RX LED lights every time the PCLTA-21 sees a
packet, whether or not it is addressed to the
PCLTA-21.
PCC10L7
System Image Path
Specifies the full directory path for the PCLTA-21 system images. This path is
set by the PCLTA-21 Installation Software but may be modified by the user.
Automatic Flush Cancel
If you are using an LNS application, keep this box checked, which is the default.
For non-LNS images, this function controls whether the device driver will
automatically force the network interface for the selected PCLTA-21 card to
leave the post-reset flush state whenever it is reset; an LNS network interface
does not and cannot come up in the flush state. The post-reset flush state
prevents any inbound or outbound network traffic following a reset. If this box
is not checked, it is up to the client application to manage this state.
Transceiver
Opens the PCLTA-21 Transceiver dialog (figure 3.3). Choosing this option will
retrieve the transceiver configuration of the selected PCLTA-21 card. If there is
no PCLTA-21 card currently installed in a PCI-bus slot, a message appears
stating that the operating system has removed, or has not loaded, the PCLTA-21
device driver.