User`s guide

PCLTA-21 PCI Interface User’s Guide
17
To manually initialize the PCLTA-21 card, verify that the control panel
application’s System Image Path entry is correct, then click the Apply button.
An error will be reported if an attempt is made to view the transceiver type
before the PCLTA-21 card is initialized. Testing the card with the Diagnostics
button produces the diagnosis: “Image file not found.” In this case, return to the
control panel application’s main window and manually initialize the PCLTA-21
card.
Device Specific Settings
The PCLTA-21-specific options consist of five separate controls (figure 3.2).
These controls are defined as follows:
Figure 3.2 PCLTA-21-specific Controls
Device Selected
Controls which PCLTA-21 card is selected for configuration. The PCCLON1 and
PCCLON2 drivers are installed by the installation software. If additional drivers
have been manually installed, they also will be available.
NI Application
Controls the type of image or application to be used on the PCLTA-21 card. A
PCLTA-21 card can only hold one image at a time. Loading a new image will
replace the currently loaded image. The choices for these images are determined
by the image files (.NBI extension) found in the system image path specified
under General Settings for Windows 98 and Device Specific Settings for Windows
XP and 2000. Some of the possibilities include the following: