User`s guide

Configuring and Testing the PCLTA-21 Card
16
PCLTA-21 Configuration
PCLTA-21 configuration is accomplished by using the LONWORKS Plug ‘n Play
control panel application. Open the control panel application by selecting the
L
ONWORKS
®
Plug ‘n Play icon in the Windows Control Panel.
Figure 3.1 PCLTA-21 Control Panel and Icon
The L
ONWORKS Plug ‘n Play control panel application is divided into three
parts: a device selection area, a general settings area, and a control section. The
device selection area contains configuration settings and diagnostic controls that
are specific to an individual PCLTA-21 card and its device driver. The general
settings area contains settings for all PCLTA-21 cards used with the PC. The
control section contains buttons for accepting or canceling the changes made in
the control panel.
PCLTA-21 Initialization
In most cases, PCLTA-21 initialization occurs automatically upon installation of
the card and subsequent power-up of the computer. Manual initialization will be
required following software installation to a directory other than c:\lonworks,
or after moving the PCLTA-21 system images.