User`s guide

PCLTA-21 PCI Interface User’s Guide
13
The following example creates a device alias that routes all service
requests for LON1 to the PCCLON1 PCLTA-21 card.
[DRIVERALIAS]
LON1=PCCLON1
LonManager ISA Protocol Analyzer Compatibility
The device driver for the PCLTA-21 card and the driver for the Model
33100-00 LonManager Protocol Analyzer ISA-bus card share the same
Windows VxD identifier. As a result, both types of cards cannot run on a
PC at the same time. So, the PCLTA-21 installation software will comment
out the SYSTEM.INI entry that loads the ISA-bus driver.
PCC-10 and PCLTA-21 Compatibility
The LONWORKS Plug n’ Play control panel can only support one type of
downloadable-image network adapter at a time. As a result, both types of
cards cannot run on the PC at the same time.
Automatic Flush Cancel Issues
If the PCLTA-21 card appears to install and test normally, but still will not
communicate on the network, check to be sure that the Automatic Flush
Cancel checkbox in the L
ONWORKS Plug ‘n Play control panel applications
is checked. For more information, see the Automatic Flush Cancel
section in Chapter 3.