User`s guide

PCLTA-21 PCI Interface User’s Guide
7
DOS applications to be used in a Windows 98 DOS shell/window. For more
information see Virtual-Mode DOS Driver later in this chapter. The
following line is added to the CONFIG.SYS file:
DEVICE=C:\LONWORKS\BIN\LDVVDD.SYS /D1
10. Software installation is complete. At the prompt to restart the computer,
remove the PCLTA-21 installation CD and shut down the computer. Next
insert the PCLTA-21 into a PCI slot and turn the computer back on.
Windows will discover and recognize the PCLTA-21.
Windows 2000 and XP Software Removal Procedure
To remove the PCLTA-21 software under Windows 2000 or XP, follow these
steps:
1. Choose the Add/Remove programs icon from the Windows Control
Panel.
2. Select “LonWorks
®
PCLTA-10/21/PCC-10”.
3. Click the Change/Remove button.
4. Confirm the removal at the prompt.
5. If necessary, edit the CONFIG.NT file to remove any references to the
PCLTADOS.SYS driver.
Windows 98 Software Removal Procedure
To remove the PCLTA-21 software, follow these steps:
1. Choose the Add/Remove Programs icon from the Windows Control
Panel.
2. Select “LonWorks
®
PCLTA-10/21/PCC-10”.
3. Click the Add/Remove button.
4. Confirm file removal at the prompt.
5. If necessary, edit the CONFIG.SYS file to remove any references to the
stub driver.