User`s guide

iv Echelon
Transceiver… 3-4
Diagnostics… 3-5
General Settings 3-5
System Image Path 3-5
Layer2 and Layer6 Buffering 3-5
Enable PC Card Reset 3-5
PCLTA-20 Diagnostics 3-6
Driver Status 3-6
Diagnostic Commands 3-7
Test 3-7
Comm 3-8
Service 3-9
Restart 3-9
Reset 3-9
4 Developing with the PCLTA-20 Adapter 4-1
Initializing the PCLTA-20 Adapter 4-2
Canceling the Flush State 4-2
Configuring the PCLTA-20 Adapter with a Network Address 4-2
Installing a PCLTA-20 Adapter on a L
ON
W
ORKS
Network 4-3
Installing with an LNS Tool 4-3
Installing with the LonBuilder
®
Tool 4-3
Installing with Other Network Tools 4-4
Rebooting a PCLTA-20 Adapter 4-5
Default Configuration 4-5
5 Electrical and Mechanical Interfaces 5-1
PCLTA-20 Adapter Board Layout 5-2
P1 and P2 PCI Bus Connector 5-3
Network Connector 5-3
Mechanical Considerations 5-4
6 References 6-1
Reference Documentation 6-2
CE Declaration of Conformity