User`s guide

4-6 Using the PCLTA-20 Adapter
Table 4.2 Default MIP Mode PCLTA-20 Buffer Configuration
Buffer Type
Default
Count
Default
Size
Number
of Bytes
Application input buffers 15 255 3,825
Application output buffers 31 255 7,905
Application priority output buffers 15 255 3,825
Network input buffers 63 255 16,065
Network output buffers 2 255 510
Network priority output buffers 2 255 510
Receive transaction buffers 16 13 208
Transmit transaction buffers 2 28 56
TOTAL USED 32,904
For the NSI mode the program ID is (HEX) 80 00 01 01 03 00 xx 3C, where xx is the
XID. The buffer settings are as follows:
Table 4.3 Default NSI Mode PCLTA-20 Buffer Configuration
Buffer Type
Default
Count
Default
Size
Number
of Bytes
Application input buffers 3 255 765
Application output buffers 3 255 765
Application priority output buffers 3 255 765
Network input buffers 2 66 132
Network output buffers 2 66 132
Network priority output buffers 2 66 132
Receive transaction buffers 16 13 208
Transmit transaction buffers 2 28 56
TOTAL USED 2,955
The buffer configuration may be modified from the host by sending Write Memory
network management messages, specifying the appropriate fields of the Read-only
Data Structure. The application checksum must be updated. For more details on
network management messages, and the Neuron Chip data structures, see the
Neuron Chip Data Book
, Reference [3], Appendices A and B.