User`s guide

PCLTA-20 Adapter User's Guide 3-9
The network wiring may work for this test but may fail if multiple nodes are
communicating. Be sure to verify that the proper termination is used when
troubleshooting communication problems.
The Comm feature is not designed to work across routers.
Service
The Service button will cause the PCLTA-20 adapter to broadcast a service pin
message on the network. The service pin message will not be sent if the adapter is
in the post-reset flush state (see
Automatic Flush Cancel
).
Restart
The Restart button clears the adapter’s Neuron Chip image and places the device
into the “boot” state. This is the device state found following a re-boot of the
Windows operating system. When this function is chosen a dialog box will appear
asking for confirmation of this command.
Reset
The Reset button causes a reset of the adapter’s Neuron Chip, but does not clear its
system image.