User`s guide

PCLTA-20 Adapter User's Guide 3-7
The diagnostic commands are invoked by selecting one of the buttons displayed in
figure 3.6. If a diagnostic command results in the “Image file not found” error
message, close the Diagnostics dialog box by selecting the OK button, then click the
Apply button in the PCLTA-20 control panel. This re-initializes the adapter and
allows use of the diagnostic commands.
Figure 3.6 Diagnostics dialog box commands
Test
The Test button retrieves status and error counts from the PCLTA-20 adapter. The
results of this message will be displayed in the format shown in figure 3.7.