User`s guide

3-6 Configuring and Testing the PCLTA-20 Adapter
LonWorks® PCC10/PCLTA10/PCLTA20 Device Driver
Version: 1.25
Card Type: PCLTA-20
Driver Status:
Number of Free LTA Output Buffers-
Non-Priority: 3, Priority: 3
Loaded Image Size: 49408
Interrupt Count: 4
Figure 3.5 PCLTA-20 Diagnostics dialog box
Driver Status
The content of the device driver status is as follows:
• Number of Free PCLTA-20 Output Buffers:
Non-Priority: the non-priority application output buffer count, as calculated
by the driver based on information retrieved from the PCLTA-20 adapter’s
non-volatile EEPROM.
Priority: the priority application output buffer count, as calculated by the
driver based on information retrieved from the PCLTA-20 adapter’s non-
volatile EEPROM.
• Loaded Image Size: the size, in bytes, of the currently loaded PCLTA-20
system image. This may be zero if the PCLTA-20 adapter is in the initial
“boot” state.
• Interrupt Count: the number of interrupts the driver has processed for this
device. This value is set to zero when the device is physically reset.
Diagnostic Commands