User`s guide

4-2 Electrical Interface
Network Port
The PCC-10 has a 15-pin network port connector for interfacing with a free
topology or link power channel, and for connecting external transceiver pods.
Figure 4.1 shows the numbering scheme of the 15-pin Hirose male connector on the
PCC-10 card (the top of the PCC-10 card is the side with the product label). Figure
4.2 shows the pin-out of the mating female Hirose NX30TA-15PAA connector to
which the network wiring or transceiver pod is connected. The Hirose connector
plug should be protected with a cover (Hirose NX-15T-CV1).
Top
Bottom
115
Hirose
Connector:
CL234-0004-5
PCC-10
Figure 4.1
PCC-10 Card Network Port Connector (not to scale)
115
Hirose
Plug Cover:
NX-15T-CV1
Hirose
Connector Plug:
NX30TA-15PAA
Figure 4.2
Network Cable Connector (not to scale)