User`s guide

PCC-10 User's Guide 3-7
Figure 3.4 PCC-10 Diagnostics Dialog Box
Driver Status
The content of the device driver status is as follows:
• Number of Free PCC-10 Output Buffers:
Non-Priority: the non-priority application output buffer count, as
calculated by the driver based on information retrieved from the PCC-10
card’s non-volatile
EEPROM
.
Priority: the priority application output buffer count, as calculated by the
driver based on information retrieved from the PCC-10 card’s non-volatile
EEPROM
.
• Loaded Image Size: the size, in bytes, of the currently loaded PCC-10
system image. This may be zero if the PCC-10 card is in the initial “boot”
state.
• Interrupt Count: the number of interrupts the driver has processed for this
device. This value is set to zero when the device is physically reset.