User`s guide
PCC-10 User's Guide 2-5
!
Windows 95 Warning
Some Windows 95 computer systems come equipped with hardware (such
as CDROM drives) which use their own card and socket services. These
services replace those provided by Windows 95, and may contain
incompatibilities that prevent the PCC-10 card from functioning.
One example is SystemSoft’s CardWorks
TM
PCMCIA Drivers, which are
packaged with the Axonix ProMedia
TM
Portable CDROM Drive. To allow
the PCC-10 card to operate with these drivers, some of its services must be
disabled by commenting-out the lines in the PC’s CONFIG.SYS file which
contain the following instructions:
C:\CARDWORK\SSTOPIC.EXE, C:\CARDWORK\ATADRV.EXE,
C:\CARDWORK\MTAA.EXE, C:\CARDWORK\MTAB.EXE,
C:\CARDWORK\MTI1.EXE, C:\CARDWORK\MTI2P.EXE,
C:\CARDWORK\MTATM.EXE, C:\CARDWORK\MTHB2.EXE,
C:\CARDWORK\MTSRAM.EXE, C:\CARDWORK\MTDDRV.EXE,
C:\CARDWORK\FTL.EXE, C:\CARDWORK\CARDID.EXE,
C:\CARDWORK\AXONIXXR.SYS
Windows 3.1 and 3.11 Software Installation Procedure
Prior to installation, ensure that the computer is running the Windows 3.1 or 3.11
Operating System (hereafter referred to as Win3.1x). The PCC-10 software cannot
be installed from DOS or a DOS window.
1. Close all open programs.
2. Insert the installation diskette into the PC.
3. Within Program Manager, choose the Run command from the File menu.
4. When prompted for a program name, enter the command:
a:\SETUP.EXE
If necessary, replace a: with the drive letter which corresponds to the drive
containing the PCC-10 installation diskette.
5. When prompted with a list of languages, click on the desired language. A
checkmark will appear to the left of the language to be installed.
6. When prompted for a destination directory, enter the desired installation
directory. By default this directory is c:\lonworks, unless previous
L
ON
W
ORKS
products have been installed and registered a different path in
the ECHELON.INI file. This path may be modified using the Browse button;