Owner manual

OpenLNS Programmer's Reference 907
RetryCount
Summary
Sets the retry count used by the Object Server (and
connections that use the default System value) for all
network management messages that use the
request/response, unacknowledged/repeat, or acknowledged
message service types.
You can set the interval for retry messages sent using the
acknowledged or request messages by writing to the TxTimer
property.
You can set the interval for repeat messages sent using the
unacknowledged/repeat message service by writing to the
RepeatTimer property.
Availability
Local, full, and lightweight clients.
Syntax
retryCountValue = object.RetryCount
Element
Description
retryCountValue
The retry count value. This property
has a range of 0–15.
object
The System object to be acted on.
Data Type
Integer.
Read/Write
Read/write.
Added to API
Prior to LNS Release 3.0.
SecurityLevel
Summary
Controls the level of system key security. Specifically, this
property controls the behavior of the Object Server when
installing and updating devices with the
AuthenticationEnabled property is set to True.
Availability
Local, full, and lightweight clients.
Syntax
securityLevelValue = systemObject.SecurityLevel
Element
Description
securityLevelValue
The level of security in the system.
The valid values for this property,
which are contained in the
ConstSecurityLevels constant, are as
follows:
0
lcaSecurityLevelKeyDistribution
Enabled
Keys are distributed over the network
whenever the AuthenticationEnabled
property of a device is set to TRUE or
a device with its
AuthenticationEnabled property set to