Owner manual

OpenLNS Programmer's Reference 824
Added to API
Depends on the object used to access the property. Generally,
this property exists for an object as soon as the object is
added to the API.
SubnetId
Summary
Contains the ID of the subnet.
Availability
Local, full, and lightweight clients.
Syntax
returnValue = object.SubnetId
Element
Description
returnValue
The subnet ID of the device.
object
The Subnet to be acted on.
Data Type
Integer.
Read/Write
Read only.
Added to API
Prior to LNS Release 3.0.
Subnets
The Subnets object represents a collection of Subnet objects. Subnets are typically added
automatically when routers or devices are added. In most cases there is no reason for your
application to manually allocate subnets. Subnets can be explicitly added using the Add
method of the System object's Subnets collection. This allows an LCA application to force a
given set of devices onto the same subnet to be able to take advantage of subnet broadcast
messaging.
• The Subnets collection accessed through the AppDevice or RouterSide objects always
returns a collection containing the single subnet associated with the device's primary
domain.
• The Subnets collection accessed through the System object represents all of the subnets
in a system.
The following table summarizes the Subnets object.
Description
A collection of Subnet objects.
Added to API
LNS Release 3.0.
Accessed Through
AppDevice object.
RouterSide object.
System object.
Default Property
Item
Methods
• Add
• Remove
Properties
• ClassId
• Count
• Item
• Parent
• _NewEnum