Owner manual

OpenLNS Programmer's Reference 29
• Subnets
• Subsystems
• Upgrade Requirement
Methods
The AppDevice object contains the following methods.
• ClearStatus
• Commission
• CommissionEx
• Decommission
• DownloadConfigProperties
• GetMessagePoint
• Load
• MoveEx
• PostMove
• PreMove
• PropagateDeviceConfigUpdates
• Reboot
• ReleasePendingUpdates
• Replace
• ReplaceEx
• ReplaceEx
• Reset
• ResyncToTemplate
• Test
• Upgrade
• UploadConfigProperties
• Wink
ClearStatus
Summary
Clears the status information stored in the device.
The clear status method causes a LonTalk Clear Status
network diagnostic message to be sent to the specified device.
This clears the error log, last reset cause, and communication
counters, which are generally accessed by reading the
device's DetailInfo object.
Availability
Local, full, and lightweight clients.
Syntax
object.ClearStatus
Element
Description
object
The AppDevice object.
Added to API
Prior to LNS Release 3.0.
Commission
Summary
Associates an AppDevice object with a physical device, and
loads the device’s network image. You can also use this
method at any time to force a reload of the device’s network