Owner manual

OpenLNS Programmer's Reference 478
Independent clients.
Syntax
tagValue = Object.Tag
Element
Description
Object
The monitor point or monitor set
object to be acted on.
tagValue
The tag associated with the object.
Data Type
Variant.
Read/Write
Read/write.
Added to API
LNS Release 3.0.
MonitorSets
The MonitorSets object contains a collection of MonitorSet objects representing all the
monitor sets on a device. If a device does not support monitor sets, an empty collection will
be returned when you attempt to access this collection. In general, only
NetworkServiceDevices (NSDs) support monitor sets. The following table summarizes the
MonitorSets object.
Description
A collection of MonitorSet objects.
Added to API
LNS Release 3.0.
Accessed Through
AppDevice object.
Network object.
Default Property
Item
Methods
Add
Remove
Properties
ClassId
Count
Item
Parent
_NewEnum
Methods
The MonitorSets object contains the following methods.
Add
Remove
Add
Summary
Adds a permanent MonitorSet object to the collection.
This method can only be called when connected to the
OpenLNS Server (after the Network object's Open method
has been called).
You should not add and open a monitor set in the same
explicit transaction. If you create a monitor set while the
network management mode is set to