Owner manual

OpenLNS Programmer's Reference 466
• Parent
• Tag
Methods
The object contains the following methods.
• Close
• Disable
• Enable
• Open
Close
Summary
Closes a MonitorSet object.
For permanent MonitorSet objects, this method causes the
monitor set to be closed, and all the monitor points
(MsgMonitorPoint and NvMonitorPoint objects) in the set to
be disabled. You can re-open and re-enable the monitor set
later with the Open method. Note that it is more efficient to
disable and re-enable a monitor set than to close and re-open
a monitor set later in a given client session.
When this method is invoked on a monitor set, the client
application will be notified of the disabling of each monitor
point in the set via the Object Server's
OnNvMonitorPointEvent and OnMsgMonitorPointEvent
events.
This method does not apply to MonitorSet objects that were
created as temporary monitor sets because all temporary
MonitorSet objects are deleted permanently as soon as the
client session in which they were created ends. You can
create temporary MonitorSet objects with the
CreateTemporaryMonitorSet method.
Availability
Local, full, lightweight, and independent clients. Note that
temporary monitor sets are not available on Independent
clients.
Syntax
monSetObject.Close
Element
Description
monSetObject
The MonitorSet object to be closed.
Added to API
LNS Release 3.0.
Disable
Summary
Disables monitoring of a monitor set. If monitoring is
disabled for an entire monitor set, then all the monitor points
in the set will be disabled. You will not be able to re-enable
those monitor points until the Enable method is called on the
monitor set.
You can also disable an individual message monitor point or