Owner manual

OpenLNS Programmer's Reference 1020
lcaErrLnsDsVniCloseFailed 402
There was an error closing the VNI.
lcaErrLnsDsThreadCreateFailed 403
There was an error creating the thread.
lcaErrLnsDsNotTemporaryMonitorSet 404
The requested operation can only be performed on temporary monitor sets.
lcaErrLnsDsNotTemporaryMonitorPoint 405
The requested operation can only be performed on temporary monitor points.
lcaErrLnsDsNssNotOpen 406
NSS must be opened before the requested operation can be carried out.
lcaErrLnsDsNssCreateClientFailed 407
There was an error creating the NSS client.
lcaErrLnsDsNssInitFailed 408
There was an error initializing NSS.
lcaErrLnsDsNssException 409
Error occurred during an NSS operation.
lcaErrLnsDsReadFailed 410
Network variable read failed.
lcaErrLnsDsWriteFailed 411
Network variable write failed.
lcaErrLnsDsPollFailed 412
Network variable poll failed.
lcaErrLnsDsSendFailed 413
Application message transmission failed.
lcaErrLnsDsMsgRejected 414
Application message rejected, as network management commands are restricted.
lcaErrLnsDsRequestFailed 415
Application message request failed.
lcaErrLnsDsResponseFailed 416
Application message response failed.
lcaErrLnsDsAddressNotAvailable 417
The source node address is not available.
lcaErrLnsDsIllegalHexCharacter 418
An illegal hexadecimal character was specified in the string.
lcaErrLnsDsTooManyClients 419
There are too many clients connected to the server.