Owner manual

OpenLNS Programmer's Reference 1011
A service which is only available local to the server or on a Full client has been requested
from a Lightweight client.
lcaNotAnNsiHost 118
The (hosted) device does not execute the NSI firmware, and the requested service can not
be completed therefore.
lcaErrInterfaceNotModifyable 119
An attempt to dynamically modify a static interface was made. To support dynamic
interface modifications, dynamic network variables might be supported by implementing
the wink command extensions as documented in the LonMark Application Layer (7)
Interoperability Guidelines, Version 3.1 or better.
lcaErrNoConnectionToServer 120
There is no communication with the OpenLNS Server. This error may occur for a remote
client operation when the OpenLNS Server has shutdown.
lcaErrInvalidInitString 121
The AddNvFromString or InitFromString method was provided with an invalid string.
lcaErrReadOnlyInContext 122
Contact customer support.
lcaErrInvalidPropChangeEvent 123
Contact customer support.
LcaNotAllowedWhenIndependent 124
The called service doesn't work in server-independent mode.
LcaNetworkNotOpen 125
The network is not open.
LcaCantReadMsgPoint 126
The object server is unable to read the message point.
LcaOpenCloseTypeMismatch 127
If the Network object's Open method is used to open a network, the Close method must be
used to close it. If the OpenIndependent method is used to open the network, the
CloseIndependent method must be used to close it.
LcaInvalidDomainLength 128
The domain is the wrong length.
LcaDatabaseRecoveryFailed 129
The database recovery operation failed.
LcaOnlyAllowedOnLocalVNI 130
The requested service is not available on a remote Full client.
LcaInvalidHexValue 131
An invalid hexadecimal value was supplied.
LcaUniqueNVNameRequired 132