Owner manual

OpenLNS Programmer's Reference 994
Could not communicate with the network interface. A message timed out.
lcaErrNiUplinkCmd 9
An uplink command was received from the NSS instead of a message.
lcaErrNiInternalErr 10
An internal error occurred, probably an invalid completion code.
lcaErrNiFileOpenErr 11
The log file could not be created or opened.
lcaErrNiNotNss 12
The network interface received an LNS command, when no NSS was present.
lcaErrNiInvalidData 13
The parameter or return data was invalid.
lcaErrNiMsgRouted 14
The message was read, but then processed by a message callback function.
lcaErrNiResourceProblem 15
The required resources were not available to complete the function.
lcaErrNiInvalidNsi 16
The attached network interface does not contain NSI firmware.
lcaErrNiBadMessage 17
Poorly formed message.
lcaErrNiVniSendMsgFailure 18
The VNI had a message send failure.
lcaErrNiVniSendRespFailure 19
The VNI failed to send a response.
lcaErrNiVniReadFailure 20
The VNI failed to read a message.
lcaErrNiLostRefId 21
The VNI lost a network interface reference message ID.
lcaErrNiVniNotOpen 22
The LonTalk stack has not been opened.
lcaErrNiVniInitFailure 23
Could not initialize the LonTalk stack.
lcaErrNiObsolete 24
This is an internal error and should be reported to customer support.
lcaErrNiBadRefId 25
Bad network interface reference message ID.
lcaErrNiImplicitAddrDisallowed 26