Owner manual

OpenLNS Programmer's Reference 980
lcaErrNsCpDbLimit 93
The configuration property database limit has been exceeded.
lcaErrNsCpRangeNotFound 94
The specified configuration property range does not exist.
lcaErrNsCpRangeDblimit 95
The configuration property range database limit has been exceeded.
lcaErrNsConnectionError 96
Connection rebinding failed for a set of moved nodes. Possible causes are: no more
address table slots, no more groups, or broadcast violation.
lcaErrNsFileLookupError 97
An error occurred during a file operation, probably due to an out of range file index.
lcaErrNsFileIoError 98
The file operation target failed to read/write a file.
lcaErrNsFileTimeoutError 99
The target timed out during a file transfer operation.
lcaErrNsFileWindowError 100
The target received a packet out of order during a file transfer operation.
lcaErrNsFileAuthError 101
File transfer failed due to incorrect authentication.
lcaErrNsFileAccessUnavail 102
Random file access is not implemented on the target.
lcaErrNsFileOpenFailure 103
The target failed an open file operation.
lcaErrNsFileSeekInvalid 104
The target failed a file seek operation.
lcaErrNsCantModifyConstCp 105
An attempt was made to modify a constant configuration property.
lcaErrNsCpDefaultsNotFound 106
Default configuration parameters have not been uploaded to the database. To correct
this, you should set default values from the current values in the device using the
UploadConfigProperties method of the AppDevice object. Use the
lcaConfigPropOptSetDefaults and lcaConfigPropOptLoadUnknown upload options when
you call the method. To avoid this error in other databases, import a program template
with a XIF containing CP default values.
lcaErrNsCantFindConnection 107
The requested connection was not found.
lcaErrNsLmobjMemNotFound 108