Owner's manual

OpenLNS CT User’s Guide 265
• Select Subsystem Page to include the application devices,
routers, and functional blocks in the current subsystem. This is
the default.
• Select Subsystem Hierarchy to include the application devices,
routers, and functional blocks in the current subsystem and
subsystems nested in it.
• Select Entire Network to include all the application devices,
routers, and functional blocks in the current OpenLNS CT
network.
Functional Block Status
to Report
Select which functional blocks with a specific status to include in
the Device Status Summary.
For a functional block to be included in the report, its device must
be configured and online.
Status reporting is not supported by all functional blocks. If an
expected functional block does not appear in the summary, it
means that the functional block does report the selected status. In
this case, OpenLNS CT treats the functional block as if the status
was reported as not set by the device.
Override Includes functional blocks in the override state in the Device Status
Summary Report. This check box is selected by default.
Disabled Includes disabled functional blocks in the Device Status Summary
Report. This check box is selected by default.
Alarm Includes functional blocks in the alarm state in the Device Status
Summary Report. This check box is selected by default.
Communication Failure Includes functional blocks that have had a communication failure in
the Device Status Summary Report. This check box is cleared by
default.
Self-Test Failure Includes functional blocks that have had a self-test failure in the
Device Status Summary Report. This check box is cleared by
default.
Advance Options Opens a dialog containing additional status summary options when
you click Next.
Set All Selects all the functional block status options.
Clear All Clears all the functional block status options.
Set as Default Options Causes the options set in this window to become the defaults for this
OpenLNS CT network. The default options are set when you click
Next.
3. Click Next. If you selected the Advanced Options check box, the Advanced Status Summary
Options dialog box opens. Otherwise, you can skip to step 5, in which the Device Status
Summary Results dialog opens.