User`s guide

LONWORKS FTT-10 Transceiver User’s Guide 6-7
5. Select B uild, B uild from the NodeBuilder menu to generate the necessary
images to program your custom device. Building and Loading the
Application Image in chapter 5 of the NodeBuilder User’s Guide contains a
table which describes the extensions applied to the various images created
when a build occurs. Take the appropriate image to a PROM programmer
and generate the initial PROM or Flash image.
Warning: Flash memory must be explicitly secured by the PROM programmer
once the image is programmed. See SDP information provided by the
manufacturer of the PROM programmer.
Warning: All Neuron 3120 Chips must be programmed with the generated .NEI
image before they are soldered onto a PCB assembly.
Table 6.3. Example NodeBuilder Device Template Values for a TP/FT-10 Control Module
Hardware
Target Hardware: Other
Neuron Model: 3150
Clock Speed: 5MHz
Transceiver Type: TP/FT-10
Firmware
System Image: Default
Version: 6
Image Name: SYS3150
Memory Map Start Address End Address:
ROM: 128 0000 7FFF
NV RAM: 0 0000 0000
RAM: 0 0000 0000
I/O: 0 0000 0000
Memory Type: