User`s guide

3-2 Mechanical Considerations
Mechanical Footprint
The FTT-10A transceiver mechanical dimensions are shown in figures 3.1
through 3.4. The transceiver is mounted to the application board as a through-
hole, soldered component. Decisions about component placement on the
application electronics board must also consider electromagnetic interference
(EMI) and electrostatic discharge (ESD) issues as discussed elsewhere in this
document.
7.2mm
(0.28")
max.
3mm
(0.12")
min.
Figure 3.1 FTT-10A Transceiver Side View
ECHELON
FTT-10A
50051
Pin 1 is located
at the lower left
corner
17.8mm(0.70") max.
13.7mm
(0.54")
max.
Figure 3.2 FTT-10A Transceiver Top View