Manual

A
Communications Parameters for
LONWORKS Routers
LONWORKS routers are initially programmed with
communications parameters as listed in this appendix.
Parameters for L
ONMARK approved transceivers correspond
to the parameters defined by the L
ONWORKS Interoperability
Guidelines. Parameters specified as “Configurable” can be
changed by a network services tool.
These parameters only apply to routers with router
firmware version 5 or newer. The firmware version number
for a router can be determined with the Query Status
network diagnostic message.
Communications parameters for routers with version 4 or
older firmware should be re-installed to ensure that the
standard interoperable parameters are used.
L
ONWORKS Router User’s Guide 109