User Manual

226 Appendix H: Appendix H
LonTalk Interface Developer Utility Error and
Warning Messages
LID# Description
55 The specified framework is not yet supported
This is an internal error.
57 Required source file missing
59 Too many network variables. The sum of static and dynamic
variables cannot exceed 4096.
60 Insufficient number of addresses
This message includes how many addresses are require for the
application, and how many were specified.
61 The DMF window specification is invalid, as it exceeds the 64 KB
address range
62 Insufficient buffer space
The message includes the total number of bytes available for
transceiver buffers and how many additional bytes your selected
configuration requires.
Warning Codes
LID# Description
4001 An XIF file contains more fields than expected
Refer to the warning message for line # and filename. This might
result in an automatic downgrading of the device interface file to the
version supported by the LonTalk Stack or ShortStack tools. Check
www.echelon.com for available updates.
4002 An intermediate file cannot be removed in the sweep-phase. See
message for details
Refer to the warning message for details about the warning cause.
The sweep occurs when the utility’s operation is complete and the
utility did not run in the Trace verbosity level. The warning
indicates that an intermediate file cannot be removed.