User Manual

LonTalk Stack Developer’s Guide 147
Command Switch
Long Form
Short
Form
Description
--silent Suppress banner message display
--source -n Use the specified model file
--spdelay -p Set the service pin notification delay (255=default,
0=off)
--txdb -t Manage specified number of transmit transaction
records
--txttl -T Let transmit transactions expire after specified number
of microseconds
--verbose -v Run with verbosity level 0 (normal), 1 (verbose), or 2
(trace)
--verbosecomments -V Generate verbose comments
--warning Display specified message type as a warning
Specifying Buffers
The --buffer (-B) command switch specifies a number of buffers of a specified
type. The supported types of buffers are:
• Application input buffers
• Application output buffers
• Application output priority buffers
• Link-layer buffers
• Network input buffers
• Network output buffers
• Network input buffer size
• Network output buffer size
• Network output priority buffers
For each of these buffer types, you can specify a number of buffers using the
following syntax:
--buffer=buffer_type.number
where buffer_type can be any of the specifications listed in the following table,
and number is the number of that type of buffer. Each of the specifications has
several allowable values; the table lists the primary specification and allowable
alternate specifications.