Owner manual

62 Network Interfaces
2.
Select the network interface that you want to configure in the Device
Selected dropdown list box.
3.
For the NI Application dropdown list box:
a.
If you are using a PCC-10, select PCC10VNI.
b.
If you are using a PCLTA-20 or a PCLTA-21, select PCL10VNI.
4.
Click OK to save your changes and close the dialog. You can now use
your PCC-10, PCLTA-20 or PCLTA-21 with the protocol analyzer.
See one of the following manuals for additional information:
• LonWorks PCC-10 PC Card User's Guide (078-0155-01B)
• LonWorks PCLTA-20 PCI LonTalk Adapter User's Guide (078-0179-01C)
• LonWorks PCLTA-21 PCI Interface User's Guide (078-0271-01A)