Owner's manual

LonPoint Module Hardware and Installation Guide iii
Contents
1 Introduction 1-1
Applications 1-2
Audience 1-4
Content 1-4
Related Documents 1-4
2 Description of the LonPoint Modules and Base Plates 2-1
LonPoint Interface Modules 2-2
LonPoint Interface and Router Module Symbology 2-9
Network Connector 2-9
Front Panel Label 2-9
Service Switch/LED 2-9
Power or Power/Wink LED 2-10
I/O Number 2-10
Digital Input 2-10
Digital Output 2-10
Analog Input 2-10
Analog Output 2-11
Hand/Off/Auto Switch 2-11
Input Status LEDs 2-11
Output Status LEDs 2-11
Router Channel A 2-12
Router Channel B 2-12
Router Activity LED 2-12
3 Network Cabling and Connections 3-1
Network Cabling – TP/FT-10 Channel 3-2
System Performance and Cable Selection – TP/FT-10 Channel 3-4
TP/FT-10 Cable Termination 3-5
Free Topology 3-5
Doubly Terminated Bus Topology Segment 3-6
Terminating Shielded Cables for the TP/FT-10 Channel 3-6
Network Cabling – TP/XF-1250 Channel 3-7
Distribution Rule for TP/XF-1250 Channel 3-7
Terminator for TP/XF-1250 Channel 3-9
I/O Cabling 3-9
Power Cabling 3-9
4 Installation and Wiring of Base Plate 4-1
LonPoint Type 1 Base Plate Installation 4-2
Installing a Compatible Electrical Box 4-5
Connecting Wiring 4-8
LonPoint Type 1D DIN Base Plate Installation 4-9
Connecting Wiring 4-12
Connecting the Jumper Plug(s) 4-13