Owner's manual

IzoT Resource Editor User's Guide 21

This dialog allows you to choose a value for each part of the standard program ID. The

Program ID field at the bottom of the dialog displays the current program ID. Enter

the following values to set the program ID:

Manufacturer

The device manufacturer. Click the arrow to

select from a list of all the LONWORKS device

manufacturers who are members of the LONMARK

Interoperability Association. If your company is a

member of the LONMARK association but is not

included in the list, download the latest program

ID data from www.lonmark.org/spid. If your

company is not a member of the LONMARK

association, get a temporary manufacturer ID

from www.lonmark.org/mid. If your company is a

LONMARK member, but not listed in the updated

program ID list, or if you have a temporary

manufacturer ID, select <Enter Number

[Decimal]> in the Manufacturer list, then enter

your manufacturer ID in the field to the right of

the Manufacturer field. Enter the value in

decimal, the calculator converts it to hex for the

program ID. You do not have to join the

LONMARK association to get a temporary

manufacturer ID, the information required to get

one is very minimal, and there is no fee to get one.

However, if your company is not a member of the

LONMARK Interoperability Association, now is a

good time to join. For more information, see

www.lonmark.org.