User`s guide

i.LON SmartServer Power Line Repeating Network Management Guide 85
3. Create an OFF event that occurs at sunrise. To do this, follow these steps:
a. Click anywhere in the row under the Schedule, Event Time, Value, or Priority columns at
the time the event is to occur. The Add Event dialog opens. Alternatively, you can right-
click a time under the Time column or right-click the column to the right and click Add
Event on the shortcut menu to open the Add Event dialog.
b. Under the Exception property, verify that the name you specified for the weekday exception
is selected.
c. Select the Show Advanced check box. A Function field appears in the dialog.
d. In the Function box, select the Sunrise (
) icon. The calculated sunrise time appears in the
Time box, which becomes read-only, and an Offset field is added to the dialog. Verify that
the Offset field is set to 00:00.
e. In the Value box, select OFF. If OFF does not appear as an option in the list, you can enter
OFF and then create an OFF preset as described in the Selecting Data Points section.
f. In the Priority box, enter a priority that is lower than the 255 priority used for the weekday
daily schedule (this example use a priority of 220). This priority essentially locks out the
events in the weekday daily schedule, which have lower priorities (255).