User`s guide

i.LON SmartServer Power Line Repeating Network Management Guide 45
1. Attach the replacement device to the network by applying power to the device and attaching its
network connection as documented by the device manufacturer.
2. Start the Street Lighting Helper application. To do this, tap Start, tap Programs, tap Street
Lighting Helper. The Street Lighting Helper application opens.
3. Acquire or enter the location and Neuron ID of the replacement device.
4. Connect the Pocket PC to the SmartServer as described in Chapter 2.
5. Start and configure the iLonProxyPocket application as described in Chapter 2.
6. Activate the Street Lighting Helper application
7. Tap Send. The SmartServer downloads the application to the replacement device, decommissions
the replacement device, begins repeater discovery, and then commissions the replacement device.
Replacing Devices with the SmartServer
To replace a device with the SmartServer, follow these steps:
1. Attach the replacement device to the network by applying power to the device and attaching its
network connection as documented by the device manufacturer
2. Right-click the original device, point to Manage, and then click Replace on the shortcut menu.
3. The Replace LON Device dialog opens.