User`s guide

i.LON SmartServer Power Line Repeating Network Management Guide 39
7. Optionally, you can view statistics related to signal at the hop between the selected device and all
the proxies (repeating devices) that can be used to relay messages to that device, including the
current proxy. To view the available proxies for a given device, follow these steps:
a. Right-click the device and select Show Available Proxies in the shortcut menu.
b. The Show Available Proxies dialog opens.
c. All the proxies (repeating devices) that can directly communicate with the selected device,
including the current proxy, are listed in columns. For each proxy, the following statistics are
listed below it:
Primary
Frequency
The cached signal strength and signal margin measurements at the hop
between the selected device and the proxy on the primary frequency.
Signal Strength The attenuation (reduction in amplitude and intensity) of the signal at
the hop in decibels (dB).
Signal Margin The amount that the signal is greater than the noise level at the hop in
decibels (dB).
Secondary
Frequency
The cached signal strength and signal margin measurements at the hop
between the selected device and the proxy on the secondary frequency.
Signal Strength The attenuation (reduction in amplitude and intensity) of the signal at
the hop in decibels (dB).