User Manual

13
ASSEMBLY
Remove nut from left pedal by
turning clockwise.
Screw left pedal onto crank arm
counterclockwise. Use double sided
wrench to ensure pedal is firmly
seated against crank arm.
The threads are reversed on LEFT pedal and nut.
Plug power adapter into port
located on the rear foot bracket,
then plug into wall outlet.
The assembly of your Echelon®
Connect bike is now complete!
Finger tighten nut counterclockwise
back onto pedal bolt.
Hold pedal with double sided
wrench and use single sided wrench
to tighten nut counterclockwise.