R OW INSTRUCTION MANUAL
Hello, I am Lou Lentine, President of Echelon, and I would like to welcome you to the Echelon community. You’ve made a great decision for yourself and your family. The Echelon Experience is an innovative combination of fitness products integrated with our state-of-the-art Echelon Fit App. This brand-new, fitness lifestyle connects your family, friends, the Echelon community, and Echelon instructors together to help you with your fitness goals.
FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT 15.21 YOU ARE CAUTIONED THAT CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PART RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. 15.105(B) THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION.
INNOVATION, SCIENCE AND ECONOMIC DEVELOPMENT CANADA (ISED) INNOVATION, SCIENCE ET DÉVELOPPEMENT ÉCONOMIQUE CANADA (ISED) THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003 CET APPAREIL NUMÉRIQUE DE CLASSE B EST CONFORME À LA NORME NMB-003. CANADIAN NOTICE THIS DEVICE COMPLIES WITH ISED LICENSE-EXEMPT RSS STANDARD(S).
NOTE: CARE SHOULD BE TAKEN IN MOUNTING AND DISMOUNTING THE STATIONARY EXERCISE BIKE. BEFORE MOUNTING OR DISMOUNTING MOVE THE PEDAL ON THE MOUNTING OR DISMOUNTING SIDE TO ITS LOWEST POSITION AND BRING THE MACHINE TO A COMPLETE STOP. THE MANUFACTURER RECOMMENDS TO PLACE THE ECHELON® CONNECT BIKE IN A SPACE WHERE YOU HAVE TWO FEET OF CLEARANCE ON ALL SIDES OF THE BIKE FOR SAFE MOUNTING AND DISMOUNTING OF THE EXERCISE BIKE. THE MINIMUM DIMENSIONS ARE: 0.5 M (19.7 IN.) ON AT LEAST ONE SIDE, AND 0.5 M (19.7 IN.
1. A n appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. 2. D o not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons. 3.
damaged, or dropped into water. Return the appliance to a service center for examination and repair. 6. Do not carry this appliance by supply cord or use cord as a handle. 7. Keep the cord away from heated surfaces. 8. Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like. 9. Never drop or insert any object into any opening. 10. D o not use outdoors. 11.
• NEVER allow children to play on or around the bike. This helps protect them from injury from moving parts. • ALWAYS set the bike up properly for your specific body type. The Echelon® Connect offers up/down and fore/aft adjustments that are clearly marked to ensure a quick and easy customization for each workout. • ALWAYS check the bike before use. •N EVER use the bike if it is not properly/completely assembled or is damaged in any way. •N EVER exceed the weight limit for this bike.
• ALWAYS ensure that the Echelon® Connect is wiped down after each use to keep it sanitary. • Cleaning and user maintenance shall not be made by children without supervision. If any problems arise affecting the performance of the Echelon® Connect, contact the manufacturer immediately. Always ensure that parts which undergo wear are checked regularly.
INCLUDES 1. E chelon ® Row Base 2. Echelon ® Row Rail 3. Rear Foot 4. Front Foot 5. 10 Big Screws 6. 8 Small Screws 7. Hex Key 8. Left Foot Carriage 9. Right Foot Carriage 10.
Go to member.echelonfit.com and follow the onscreen instructions to choose a plan and setup your account. This info will be needed to login to your account on the Echelon Fit App. All account info and plans are managed at member.echelonfit. com and use the same login. After creating your account login on member.echelonfit.com, write down your login info. This will be the same login for the App.
ASSEMBLY 2. Tighten the screws with hex key. 5. Place seat on ground and lay the rail onto seat so the screw holes on the bracket align with screw holes on seat. 6. Place all four screws into screw holes and tighten with hex key. *Arrow pointing towards side with handle. 4. Set rower upright and adjust the arm of phone holder to your desired level. 7. Place the rail onto rail bracket. ASSEMBLY 1. Place the front foot and hand tighten screws into place.
ASSEMBLY 8. Place the four screws into rail and hand tighten. 9. Tighten screws with hex key. 10. Align front foot with screw holes on the rail and hand tighten screws into the foot. 11. Tighten screws with hex key. 12. Align the right foot carriage with the screw holes on the body of the rower and hand tighten the three screws. 13. Tighten screws with hex key. Repeat with left foot carriage.
. Toggle the power switch, as shown above. 17. To lower the rail, press down the foot pedal at the joint and lower the rail gently to the ground. 18. T o lock into place, pull up on this handle until you hear a click. Once you hear the click, the rower is safe to use. 16. Route the power cable through the cable routing clips legs, as shown above. ASSEMBLY 14. Connect the power cord.
6 BATTERY STRIP REMOVAL Flip over the handle and place into the handle cradle. While keeping thumb on cover, remove battery cover with a small flat-head screwdriver. Pull on battery activation strip. Slightly press down on battery to make sure it is seated properly. Replace the battery cover. Flip handle back over and place into handle cradle.
1 FOLDING / MOVING
8 ADJUSTING RESISTANCE /FOOTREST To turn up the resistance, press the right toggle. While holding red locking mechanism, pull up or push down the black sliding adjustment. To turn down the resistance, press the left toggle. To adjust footrest, push down on the red locking mechanism on the footrest.
1
0
