User's Manual

ANSI Electric Meter v3.1 User’s Guide 7
Mounting the Meter
The form, current class and rated voltage of the ANSI meter are marked on the front of
the meter, as shown in Figure 2.1. Before mounting the meter in its socket, you should
make sure that these settings match the form, maximum current and rated voltage for
the socket you are using.
Operating Environment
The meter is designed to operate in an indoor or outdoor (IP54 rating) location, in a non-
hazardous environment. You should make sure to mount the meter in a well-ventilated
enclosure that will prevent condensation from forming inside the meter.
Mounting Surface
The meter is designed to be installed in an upright position on a flat vertical surface.
Figure 2.1 Form, Current Class and Rated Voltage