User's Manual

12
Installation for the Street Lighting Solution
Safety Warning
New Installations
Figure 3 shows an overview of the basic process for installing intelligent street
lights with Echelon’s Street Light Bridge technology. The process includes the
following basic steps:
1. Install a Segment Controller
2. Install luminaires
3. Install CRD 3000 Street Light Bridge modules, as needed
Alternatively, you can install the luminaires, and then install the Segment
Controller. However, this document does not describe details for this alternate
installation scenario.
!
Fuse F1 in the Street Light Bridge uses a Littleman rated, 300 VAC, 10 A, SLO-
BLO.
This device has no user-serviceable parts.
Only qualified personnel should perform the procedures in this guide.
!
Sicherung F1 im Street Light Bridge ist ein Littleman Sicherung bewertet 300
VAC, 10 A, SLO-BLO.
Dieses Gerät hat keine vom Anwender zu wartenden Teile.
Nur qualifiziertes Personal sollte die in diesem Handbuch beschriebenen
Verfahren durchführen.