User's Manual

CRD 3000 Integrator’s Guide
105
Variable
Description
Ok to Modify?
nciLedTimeout
Defines the timeout for the LEDs
on the CRD 3000 Street Light
Bridge module. The timeout starts
at each reset or power up of the
device.
Yes
Default value is 60 minutes. Set
to 0 (zero) to leave LEDs on
indefinitely, for example during
installation debugging. See
Verifying Successful Installation
for more information about the
device LEDs.
nviErrMode
Controls error simulation mode.
Yes
See Simulating Communications
Errors for information about error
simulation.
nviErrRate
Defines the error rate for error
simulation mode.
Yes
nciErrTimeout
Defines the error timeout for error
simulation mode.
Yes