User's Manual
Table Of Contents
- Welcome
- Audience
- Related Documentation
- FCC Compliance
- RF Statements
- Introduction
- Installation for the Street Lighting Solution
- Setting Up the Segment Controller
- Planning for the Street Lighting Solution
- Managing a Street Lighting Network
- Controlling a Street Lighting Network
- Interoperable Interface for the Street Light Bridge
- Cryptography License
- Glossary
Street Light Bridge Integrator’s Guide 63
c. All the proxies (repeating devices) that can directly communicate
with the selected device, including the current proxy, are listed in
columns. For each proxy, the following statistics are listed:
Primary
Frequency
The cached signal strength and signal margin measurements
at the hop between the selected device and the proxy on the
primary frequency.
Signal Strength
Direct Communication Devices: Displays the reduction in
signal strength at the device in decibels (dB).
Proxies: The reduction in signal strength at the hop in
decibels (dB). This value is the minimum of the signal
strengths measured at the selected device and the proxy.
Signal Margin
Direct Communication Devices: The amount that the signal
is greater than the noise level at the device in decibels (dB).
Proxies: The amount that the signal is greater than the noise
level at the hop in decibels (dB).
Secondary
Frequency
The cached signal strength and signal margin measurements
at the hop between the selected device and the proxy on the
secondary frequency.
Signal Strength
Direct Communication Devices: Displays the reduction in
signal strength at the device in decibels (dB).
Proxies: The reduction in signal strength at the hop in
decibels (dB). This value is the minimum of the signal
strengths measured at the selected device and the proxy.