Installation Guide

60 ECN 7000 Series Specifications
Immunity to Conducted Disturbances:
150 kHz to 80 MHz IEC 62052-11 (7.5.5), IEC 61000-4-6: 10 Vrms
Surge Immunity
IEC 62052-11 (7.5.6), IEC 61000-4-5: 6 kV common mode,
4 kV differential mode
Power frequency magnetic field
IEC 61000-4-8, IEC 61000-4-12, IEC-61000-4-13, IEC
61000-4-16: 1000 A/m
Radiated Emissions EN 55022 – Class B
Conducted Emissions with PLC EN 50065-1 – Class B
FCC Specifications
This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules, per sections 15.107 and
15.109. See also the FCC Notice on page iv.
This equipment also complies with the limits for wireless devices per FCC
sections 15.203, 15.205, 15.207, 15.209, 15.247, and 15.407. It uses frequency 2.4
GHz per Institute of Electrical and Electronics Engineers (IEEE) standard
802.15.4-2006, and uses a frequency bandwidth from 2400 MHz to 2483.5 MHz.
See also RF Statements on page iv.
Communication Specifications
Table 11 summarizes the communications specifications for ECN 7650 devices.
Table 11. Communications Specifications
Category Rating
Power line Network
LV CENELEC 50065-1 Line Communication (PLC)
LV 150/IEC 14908-3 PLC (CENELEC 50065 C-Band)
Wide Area Network
Ethernet
Dual-band 3G CDMA (EV-DO) with main and diversity
antenna (North America)
Quad-band GPRS (GSM) (worldwide)