Installation Guide

58 ECN 7000 Series Specifications
Table 7. Mechanical Specifications
Category Rating
General Mechanical
Requirements
IEC 60068-2-11
Mechanical Tests:
Mechanical Shock
ANSI C12.1 2008 4.7.3.18 in accordance with IEC 60068-2-
27
Transportation Drop
ANSI C12.1 2008 4.7.3.19 in accordance with ISTA
procedure 1A
As per ANSI C12.1 2008
Mechanical Vibration
ANSI C12.1 2008 4.7.3.20 in accordance with IEC 60068-2-
6
As per ANSI C12.1 2008
Transportation Vibration
ANSI C12.1 2008 4.7.3.21 in accordance with ISTA
procedure 1A
Resistance to Heat and Fire IEC 60695-2-11
Mechanical Wind Shear
Can withstand a 190 Pa (4 lb/sq-ft) wind simultaneously
with (12 mm) ½” thick ice
Electrical Specifications
Table 8 summarizes the electrical specifications for ECN 7650 devices.
Table 8. Electrical Specifications
Category Rating
Specified Operating Range 240 V
AC
± 20%
Internal Fuse
Littelfuse
®
215SP Series, 250VAC Time-Lag Fuse
(0215063MXESPP); Amperage rating 6.3 A. Interrupting
rating 1500 A @ 250 VAC.
Designed in accordance with IEC60127-3.
Insulation Resistance ANSI C12.1 2008 4.7.3.1 2.5kV for 1 minute
Voltage Interruptions ANSI C12.1 2008 4.7.3.2