Installation Guide
Table Of Contents
- Welcome
- Audience
- Related Documentation
- FCC Notice
- RF Statements
- EMC and Safety Statements
- 1. Introduction
- 2. Installing Components and Troubleshooting
- 3. Pole Mount Installation
- 4. Pad Mount Installation
- Introduction
- Required Tools
- Installation Location
- Preparing the Transformer Pad
- Preparing for Installation
- Performing the Installation
- Extend Pad Mounting Bracket
- Attach Pad Mounting Bracket to Lifting Nut
- Attach Conduit Housing to Pad Mounting Bracket
- Insert Conduit Thread into Conduit Housing
- Attach ECN to Pad Mounting Bracket
- Secure ECN to Pad Mounting Bracket
- Connect the ECN to Power and the Network
- Close and Lock the Conduit Housing
- Complete the Installation
- Verifying Successful Installation
- 5. Field Replacement for an ECN 7000 Series Device
- A. ECN 7000 Series Specifications
- B. Safety and High-Voltage Warnings
- C. ESD and Battery Warnings
ECN 7000 Series Hardware Guide 57
Category Rating
Clock
Real-time clock accurate to better than ±1 minute per
month; corrected by System Software. Maintained by
backup battery.
Environmental Rating Specifications
Table 6 summarizes the environmental rating specifications for ECN 7650
devices.
Table 6. Environmental Rating Specifications
Category Rating
Operating Temperature Range
–40 °C to +70 °C (–40 °F to +158 °F)
Certain options (for example, radios) could have additional
limits.
ANSI C12.1 2008 4.7.3.16 168 hrs –40 °C to +70 °C
Storage Temperature Range
–40 °C to +85 °C –40 °F to +185 °F)
ANSI C12.1 2008 4.7.3.15 168hrs –40 °C to +85 °C
Effective Relative Humidity
0% to 95%, non-condensing
As per ANSI C12.1 2008
ANSI C12.1 2008 4.7.3.22 in accordance with ASTM G155
Weather Simulation Test ANSI C12.1 2008 4.7.3.22 in accordance with ASTM G155
Salt Spray Test ANSI C12.1 2008 4.7.3.23 in accordance with ASTM B117
Raintightness
NEMA 4 and ANSI C12.1 2008 4.7.3.24 in accordance with
UL 50 E
Solar Radiation As per ANSI C12.1 2008
Salt Fog As per ANSI C12.1 2008
Mechanical Specifications
Table 7 on page 58 summarizes the mechanical specifications for ECN 7650
devices.










