User's Manual
Table Of Contents
- Welcome
- Audience
- Related Documentation
- FCC Compliance Notice
- RF Statements
- EMC and Safety Statements
- Declaration of Conformity
- Introduction
- Pole Mount Installation
- Pad Mount Installation
- Introduction
- Required Tools
- Installation Location
- Preparing the Transformer Pad
- Preparing for Installation
- Performing the Installation
- Extend Pad Mounting Bracket
- Attach Pad Mounting Bracket to Lifting Nut
- Attach Conduit Housing to Pad Mounting Bracket
- Insert Conduit Thread into Conduit Housing
- Attach ECN to Pad Mounting Bracket
- Secure ECN to Pad Mounting Bracket
- Connect the ECN to Power and the Network
- Close and Lock the Conduit Housing
- Complete the Installation
- Verifying Successful Installation
- Field Replacement for an ECN 7000 Series Device
- ECN 7000 Series Specifications
- Safety and High-Voltage Warnings
- ESD and Battery Warnings
36 ECN 7000 Series Specifications
Category Rating
Safety
UL 60950, EN 60950, CSA 60960
CE Marking
RoHS-compliant
??Safety Rating
??Certified by TÜV, Semko, and KEMA-KEUR per EN-
60950; CE Marked; UL60950, and CSA60950 by TÜV
under NRTL
EMC Specifications
Table 9 summarizes the electromagnetic compatibility (EMC) specifications for
ECN 7620 and 7650 devices.
Table 9. EMC Specifications
Category Rating
Immunity to Electrostatic Discharge:
Contact Discharge IEC 62052-11 (7.5.2), IEC 61000-4-2: 8 kV
Air Discharge IEC 62052-11 (7.5.2), IEC 61000-4-2: 15 kV
Immunity to Electromagnetic
RF Fields (80MHz to 2000
MHz)
IEC 62052-11 (7.5.3), IEC 61000-4-3: 30 V/m
Fast Transient Burst IEC 62052-11 (7.5.4), IEC 61000-4-4: 4 kV common mode
Immunity to Conducted Disturbances:
150 kHz to 80 MHz IEC 62052-11 (7.5.5), IEC 61000-4-6: 10 Vrms
Surge Immunity
IEC 62052-11 (7.5.6), IEC 61000-4-5: 6 kV common mode,
4 kV differential mode
Power frequency magnetic field
IEC 61000-4-8, IEC 61000-4-12, IEC-61000-4-13, IEC
61000-4-16: 1000 A/m
Radiated Emissions EN 55022 – Class B
Conducted Emissions with PLC EN 50065-1 – Class B