e360 ENGLISH Quick Start Guide Broadband Portable Radio
LEGAL INFORMATION Copyright ©CALTTA TECHNOLOGIES CO., LTD. 2020 No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, includsion of CALTTA TECHNOLOGIES CO., LTD. Violators Will Be Prosecuted. CALTTA TECHNOLOGIES CO., LTD. reserves the right to make guide without prior notice. to the actual product. The accessories provided with the product may vary with product models and functions.
1. GET TO KNOW YOUR RADIO 1.1 Components The e360 radio is a trunking voice intercom product based on the public network data service, which can be used in the LTE/WCDMA networks. With the help of 4G technology, the e360 achieves highspeed data connection, so that you can communicate with others in real time. NOTE: Before using the radio, read all the instructions contained in the manual and with special care, those relative to safety.
1.2 COMPONENT DESCRIPTIONS 2. No. Name No. Name 1 F1 (Function 1) button 6 LCD screen 2 PTT button 7 SOS button 3 F2 (Function 2) button 8 Antenna 4 Power button 9 Earphone/USB Type-C Interface 5 Channel/Volume knob 10 Nano-SIM Card Slot SYMBOLS DISPLAY The main screen of Android system is the starting point for you to access all Android system functions on your radio. You may study the status of the radio by the status bar on the top of the screen.
Icon Status Mute Signal indicator Data service indicator Earphone connected 2.1 LED INDICATOR The LED indicator indicates the operating status of the radio. LED Indicator No.
3. GETTING STARTED 3.1 Insert the battery 1. Insert the battery by pushing up from lower left corner in the back 2. Install successfully, ensure the battery contacts match up with the contacts in the radio. 3.2 Insert Nano-SIM card Insert a valid Nano-SIM card into the radio before using. The Nano-SIM card can be used in any corresponding format radio (the new radio will automatically read the Nano-SIM card). 1. Power off the radio. 2.
tion. 3. Close the cover of Nano-SIM card. NOTE: • Please power off the radio before removing Nano-SIM card. It is inadvisable to insert or take out the Nano-SIM card if connected to external power source. • Please avoid touching the metal plane area of the SIM card to prevent damaging the information held inside. Store the Nano-SIM card in a place away from electricity and magnetism. 3.
Desktop charging: 1. Place the radio in the desktop charger and the radio will be charged automatically. 2. After charging is completed, take out the radio. USB cable charging: 3. Connect the charge/data cable to the USB Type-C interface of the radio. 4. Connect the other end of charge/data cable to the charger, and then connect the charger to AC power socket. Battery, radio and charger will be moderately hot during charging, this is normal. 5. After charging, disconnect the charger from AC power source.
off. • If the battery will be not used for a long period, please take it out from the radio and store it in a cool, dry place. 3.4 Power on Press and hold the power button for 3~5s under the power off mode, after green indicator is lit, the LCD screen displays the power on picture, prompting that the radio is powering on. 3.
4. BASIC OPERATIONS 4.1 Log in eChat system After the radio is powered on, it will automatically detect the data network and eChat account setting, then login eChat system after detection and voice prompt the user name and group name of the current account. If the radio cannot login eChat system, please check the following information.
the PTT button to talk. 3. 4.2.2 Group selecting mode 1. Press the channel/volume knob to switch to the group selecting mode. 2. Rotate the channel/volume knob to switch to the required group. 3. for 10 seconds to select the current group automatically. 4. Press PTT button to initiate voice call to the current group. The LCD screen will display relevant information whether the call is initiated successfully, together with prompt tone and indicator. 5.
3. Press PTT button to initiate private call to the current member. 4. Press F2 button to end the private call and the radio will return to the last working group automatically. 4.6 Answer half-duplex private call 1. The radio will exit from the current working group immediately after receiving the private call. 2. The radio will join the half-duplex private call automatically and keep in the listening status. 4.7 Initiate full-duplex private call 1.
during a private or full duplex call. 5. ADVANCED OPERATIONS 5.1 System software upgrade 1. The radio will automatically detect if there is a new version when it is connected to Wi-Fi or the data service is available. 2. In case of a new version, the radio will show and broadcast a prompt message. The user should start the version upgrade process in system settings. 3. When the upgrade progress has started, the LCD screen will show a prompt.
e360 supports setting up Wi-Fi network via CPS, including add, imum of 5 Wi-Fi networks. Please contact with solution provider to 6.
2. Rotate the channel/volume knob to switch to LCD level setting. 3. Press the channel/volume knob to change the current LCD level, press the channel/volume knob can set from 1-5 cyclically. 4. Press F2 button to exit the main menu. 6.2 Network mode 1. Press and hold F2 button to enter system settings under the standby mode. 2. Rotate the channel/volume knob to switch to Network mode setting. 3. Press channel/volume knob to view the network mode list and current network mode. 4.
knob to connect the Wi-Fi network which preset by the CPS. 7. Press F2 button to go back/exit main menu. 6.4 Bluetooth 1. Press and hold F2 button to enter system settings under the standby mode. 2. Rotate the channel/volume knob to switch to Bluetooth setting. 3. Press channel/volume knob to enter the Bluetooth setting. 4. Press channel/volume knob to turn on/off Bluetooth. 5. If Bluetooth is on, you can view the Bluetooth device list.
2. Rotate the channel/volume knob to switch to language setting. 3. Press channel/volume knob to view language list and current system language. 4. Rotate the channel/volume knob to select other language. 5. Press the channel/volume knob to change to other system language. 6. Press F2 button to go back/exit main menu. 6.7 System updates 1. Press and hold F2 button to enter system settings under the standby mode. 2. Rotate the channel/volume knob to switch to system updates. 3.
11. Press F2 button to go back/exit main menu. 6.8 Voice assistance 1. Press and hold F2 button to enter system settings under the standby mode. 2. Rotate the channel/volume knob to switch to Voice assistance setting. 3. Press channel/volume knob to turn on/off Voice assistance. 4. Press F2 button to exit the main menu. 6.9 About phone 1. Press and hold F2 button to enter system settings under the standby mode. 2. Rotate the channel/volume knob to switch to About phone. 3.
3. Rotate the channel/volume knob to see previous/next message. 4. Press F2 button to exit message list. 6.11 Default dispatcher 1. Press and hold F1 button to enter dispatcher list under the standby mode. 2. Rotate the channel/volume knob to view the dispatchers. 3. If there are more than one dispatchers, rotate the channel/volume knob to choose the dispatcher and press the knob again to set it as the default dispatcher. 4. Press F2 button to exit this settings. 6.12 Application version 1.
Memory (RAM+ROM) 512MB + 4GB WLAN 802.11b/g/n,2.4GHz Location GPS/Glonass Speaker Front: 36mm Professional Speaker Card Slot Nano SIM x 1 Charging Desktop Charger / USB Type-C(Optional) Dust and Water Resistance IP54 1. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 2. Adapter shall be installed near the equipment and shall be easily accessible. 3.
This equipment is marked ENGLISH-EN CALTTA declares that the radio equipment type e360 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http:// www.caltta.com/en/download.aspx Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines.
power level of the device to ensure it only uses the minimum power required to communicate with the network. * The tests are carried out in accordance with EN 50566, EN 622092, EN 62479. SAFETY INFORMATION Do not make or receive radio calls while driving. Never text while driving. Keep your radio at least 5 mm away from your body while making calls. Small parts may cause choking. Your radio can produce a loud sound.
Turn off when asked to in hospitals and medical facilities. Turn off when told to on aircraft and at airports. Turn off when near explosive materials or liquids. Do not use at gas stations. Avoid extreme temperatures. Avoid contact with liquids. Keep your radio dry. Do not attempt to disassemble your radio.
Only use approved accessories. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. Do not rely on your radio as a primary device for emergency communications. BATTERY SAFETY INFORMATION Using CALTTA-unapproved or incompatible battery, charger or power adapter may damage your device, shorten its lifespan or cause a operating temperature range: -20 to 55°C, Charging temperature range: 0 to 40°C and the storage temperatures are -30°C to +70°C.
• Do not change or replace the battery in your device by yourself. The battery can only be changed or replaced by CALTTA or CALTTA authorized service provider. • Please disconnect the charger when the battery is fully charged. Overcharging may shorten the battery life. • When not using the device for a long period, please charge the battery about half and then store the device in a cool dry place.
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
FCC Note Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CALTTA TECHNOLOGIES CO., LTD. Address: Floor12,Building G2, International E-City,Nanshan,Shenzhen, -China,518055 Tel: +86-755-26774767 Website: www.caltta.com Privacy statement: CALTTA TECHNOLOGIES CO., LTD.
