User Manual

- 13 -
DISPLAY MANUAL
Button Function:
MODE: press this button to select the function.
----Keep pressing this button for 3 seconds to clear all data, included time,
times, calories burned, total count, distance and scan (all of the above).
Functional Operation:
1. SCAN: press the MODE button into scan state, the computer will automatically scan,
time, times, calories, total number of times, and every scan interval is 6 seconds.
2. TIME: show the time from the computer start to the end.
3. COUNT (Times Count ): show the number of times from the computer start to the end.
4. CALORIE: show the total calories from the computer start to the end.
5. TOTAL COUNT (Total Number of Times): count all times after installing the battery.
If there is without any movement signal, the computer display will close automatically after
4 minutes, and will wake up when there is movement signal or any button is operated.
6. REPS/MIN (Average Speed): show the average number of movements per minute.
Scope Description:
Function
Scanning interval
Every 6 seconds
Time (minutes)
0:00—99:59
Times count
0—9999 times
Calories
0:0—999.9 CAL
Total number of times
0—9999 times
Battery
2 piece of battery
Working temperature
0—40 degree
Storage temperature
-0 degree—+60 degree