User Manual
English
8
Replacing the roller in the motorised brush (carpets / hard oors)
If you need to change the roller tip in the motorised brush (for
hard oors / carpets); press the brush lock button.
The roller will slide out freely. Insert the desired brush roll, turn
the edge of the brush until it ts into the hole and press to
secure.
CLEANING AND MAINTENANCE
Replacement and cleaning lter and dust
container
To make sure that the vacuum cleaner always delivers
optimum performance, empty the dust container after each
use and clean the lter.
1. Remove the hand-held vacuum cleaner from the holder in the oor vacuum cleaner.
2. Press the dust container release button and remove the container.
3. Remove the dust container lter.
4. Empty the container.
5. Remove the lter cover 0. Remove the Hepa lter and conical microlter; clean both lters. You can rinse
both lters in cold water andallow the lters to dry thoroughly before reinserting them into the dust
container. Do not wash the dust container lter in the washer. For drying, do not use a hair dryer, allow
the lter let to dry by itself.
6. Replace the lter carefully in the dust container. NEVER use the vacuum cleaner without inserted lter.
7. Insert the dust container in the handheld vacuum cleaner.
WARNING: The suction opening must be permeable and free of obstructions in all circumstances.
Otherwise, it could lead to engine overheating and damage to the appliance.
Note: Depending on the intensity of use, it is recommended that you replace the lter with a new one
every 3 to 6 months to ensure the top performance of the appliance.
Carpet brush
Hard oor brush