User`s manual

EN
60
EN
61
6. Defrosting according to time
1) Press the W.T./Time Defrost button twice and “dEF2” will appear on the display.
2) Set the defrosting duration by turning “ ” (maximum setting is 95 minutes).
3) Start the defrosting process by pressing the Start/+30 Sec./Confirm button.
7. Cooking in phases
2 different preparation phases at most can be set for cooking. Defrosting as one of the phases should
be set as first. The oven will beep at the end of one phase and continues with the following phase.
Note: Auto menu cannot be set as one of the phases.
Example: If you want to defrost food for a duration of 5 minutes and then cook it at a power of 80%
for 7 minutes. The setting is as follows:
1) Press the W.T./Time Defrost button twice and “dEF2” will appear on the display.
2) Set the defrosting duration to 5 minutes by turning “
”.
3) Press the Micro./Grill/Combi. button once, .
4) Set the cooking power to 80% by turning “ ”. “P80” will appear on the display.
5) Confirm by pressing the Start/+30Sec./Confirm button.
6) Set the cooking duration to 7 minutes by turning “ ”.
7) Start the cooking process by pressing the Start/+30 Sec./Confirm button.
8. Programming function
1) First set the precise time (see instructions for setting the time).
2) Select the cooking program. Up to two phases can be set. The defrosting process should not be
applied when using the programming function.
Example: If you want to cook at a power of 80% for 7 minutes.
a. Press the Micro./Grill/Combi. button once.
b. Set the cooking power to 80% by turning “ ”. “P80” will appear on the display.
c. Confirm by pressing the Start/+30Sec./Confirm button.
d. Set the cooking duration to 7 minutes by turning “ ”.
After going through these steps, do not press the Start/+30Sec./Confirm button any more. Perform
the following:
3) Press the Clock/Pre-Set button. The two digit number for setting the hours begins to flash.
4) Set the hours between 0-23 via “ ”.
5) Press the Clock/Pre-Set button, the two digit number for setting the minutes begins to flash.
6) Set the minutes between 0-59 via “ ”.