User Manual

English
9
Note: All accessories are placed inside the cooker. Remove it from the inner pot and wash in warm water with
a sponge. Rinse o the detergent well and dry everything thoroughly. Do not use abrasive cleaning
products, scrubbers or metal utensils, the non-stick surface could be damaged. Do not use dishwasher.
Never immerse the appliance, cable or plug in water.
Place the pressure cooker on a at, heat resistant and non ammable surface.
Opening the pressure cooker
To open the lid, turn the handle on the top clockwise. Then lift the lid.
Pressure cooker assembly
Insert the pressure valve into the large recess in the upper part of the pressure cooker lid.
Push the valve down until it ts into place with an audible click.
Plug the power cord into the outlet on the back of the pressure cooker as shown in the picture. Plug the
other end of the power cord into an electrical outlet.
Insert the inner pot into the pressure cooker.
Always connect the cord to the body of the cooker rst, then to the outlet.
Put the lid back on the pressure cooker.
Make sure the latch on the back of the lid holes is inserted into the rail on the back of the pressure cooker.
Check that the safety pin, which is located on the back of the lid, is locked inwards after closing.
Turn the lid counterclockwise until it clicks into place.