Manualshelf

User's Manual

ManualsBrandsEccel Technology ManualsCamera & PhotoAction Cam user interface unit
1234
3
RJ45 connector (LAN/PoE) GPIO
header
Picture 1.2 – Angled Rear View
2. Electrical/Power
The device shall be powered by using the RJ45 Ethernet connector using a supply meeting the PoE standard.
Maximum power consumption is 5W.
3. PoE/LAN Connection
The device is powered by the PoE connector. Network configuration should be provided by the DHCP server. If the
device does not get an IP address assigned from the local network, then a message is displayed on the screen alerting
the user that there is no connection to the server.
This is the only working mode of the unit.